REP Fitness Ares 2.0 - Pre-Order (mid-December)

TFUSA Offers 3 configurations for the REP Fitness Ares 2.0 Attachment.

- Ares 2.0 - PR4000 (4-Post) - Weight Horns - Standard J-Cups - Front Foot Extensions (Not Pictured)
- Ares 2.0 - PR4000 (6-Post) - Weight Horns - 16"+16" Crossmembers - 1.25" Pull Up Bar - Standard J-Cups - Spotter Arms 
- Ares 2.0 - PR4000 (6-Post Deep) - Weight Horns - 30"+16" Crossmembers -1.25" Pull Up Bar - Standard J-Cups - Spotter Arms - Safety Straps - Leg Roller

Details about the Ares 2.0 from REP below:

The Ares™ attachment is known as a leader in the fitness world as the best, fully integrated functional trainer and lat pulldown/low row that attaches right onto your power rack. But our Colorado-based engineering team wanted to make the best even better. Inspired by customer feedback and our relentless growth mindset, meet the Ares™ 2.0 cable attachment.

INTEGRATION, UNILATERAL & BILATERAL TRAINING, TWO ATHLETES

Like the original, the Ares™ 2.0 attachment connects to your existing PR-4000 or PR-5000 power rack, saving major space by bringing a ton more versatility and cable exercises inside the rack, while preserving the original functionality of the rack. The Ares™ 2.0 attachment features dual 260lb selectorized weight stacks that can be upgraded to 310lbs each (feels like 155lbs each). This allows for both unilateral and bilateral training. This feature utilizing swivel pulleys is typically found on high-end commercial machines, but we've integrated it into the Ares™ at a more accessible price point, without compromising its premium functionality. In addition, the independent stacks allow two athletes to train on the Ares™ cables simultaneously with separate resistance levels for each, or a single athlete to superset exercises off each trolley without having to change weights between each set.

HIGHER LOW ROW & NEW FOOTPLATE DESIGN

The Ares™ 2.0 attachment features an integrated lat pulldown feature, as well as a seated row, which is new for the 2.0. This slightly higher cable point is more comfortable and functional than a low row and allows you to sit on a bench or the floor; it's your choice. Use the lat and seated row cables for unilateral exercises, as well as standard straight-bar movements. The improved footplate design is angled at the top to provide support while sitting on a bench and adjusts for multiple starting points for better foot positioning. The footplate is also wider on the 2.0 for more comfort and versatility, with the cables in the middle of your feet rather than outside like the original. Lastly, there is a cutout on the sides so you can perfectly center your REP bench (AB-5200 2.0, BlackWing™ adjustable bench, AB-3000 2.0) deeper in the rack for both incline and flat bench exercises. We also rotated the weight stacks 90 degrees and pushed them farther back to create even more usable space inside the rack for benching and use of the Safety Squat Bar.

SMOOTH FEEL & BROADER RANGE OF MOTION

The patent-pending Ares™ 2.0 attachment features trolleys that are designed with a smooth, plastic liner that’s easy to adjust up and down with one hand. We also moved the swiveling front trolley pulleys a couple more inches further out which provides a greater range of motion that’s more comparable to a traditional, stand-alone functional trainer. This also provides a greater range of motion that’s more comparable to a traditional, stand-alone functional trainer. The front and lat/seated row pulleys all swivel, making movements more versatile and ergonomic, a feature only seen on high-end commercial cable machines. The upgraded cables have a thinner coating that creates a smoother feel. Hot-rolled steel plates with a machined finish assure consistent and durable weights that the magnetized pin slides into smoothly.


We built the Ares™ 2.0 attachment for functionality first. It utilizes a 2:1 cable ratio, which means 100lbs feels like 50lbs, ideal for functional training when you want a faster-traveling cable. Better functionality is also why we switched the resting position of the front trolleys; when not in use, you now store them at the bottom of the uprights, rather than the top on the original Ares™ attachment. This creates more usable space on the rack upright at the top, which is important for those that choose the 80" upright height and want to press or squat outside of the rack.

The Ares™ 2.0 comes with a lat pulldown bar; two clips to connect them to the stack cables; and four fully knurled D-handle attachments and two integrated drop-down 5lb add-on weights (that feel like 2.5lbs) for more weight jump options. To maximize your Ares™ 2.0's potential, we strongly recommend buying the Performance Cable Package and checking out the other cable attachments. Finally, depending on what series rack you get, we recommend getting either two of the 5000 Series Leg Rollers or one of the 4000 Series Leg Rollers (Included with the 30"+16" 6-post rack configuration), so you can be locked in while doing lat pull downs.

Note: The Ares™ 2.0 attachment 4-post needs Mini Front Foot Extensions off the front and back or needs to be bolted down. If you prefer to bolt down your rack, you can delete the Mini Front Foot Extensions from your cart. (TFUSA has the front foot extension bundled automatically)

Original Ares™ attachment vs. Ares™ 2.0 attachment

•Higher attachment point of seated row
•Seated row pulleys spaced closer together for ease of attachment use and better feel
•Footplate is larger, with angled top for support during seated row
•Footplate has bench-centering cutouts for REP benches (AB-5000 2.0, BlackWing™ adjustable bench, AB-3000 2.0)
•Reorientation of weight stacks allows incline bench within rack
•Pulleys on lat pulldown and row incorporate swivels for natural feel and range of motion on unilateral movements (using D-handles at each attachment point)
•Offset front trolleys increase width of cable flies
•Integrated drop-down micro-weight adjustments (no searching for micro-plates)
•Improved lat bar rest to easily stay seated while using other cables
•Improved cable routing to rest trolley at bottom while working outside of the rack—ideal for lifters with 80” uprights needing maximum height for J-cup placement